Hotline: 0989 338 222
Chat with us


fluxmeter f10

Brand: Brockhaus

Model: F10

Analogue voltage integrator for measuring all quality-relevant magnetic parameters
Integrated calibration device
Automatic probe identification
Selection of measuring units
Integrated comparator
Self-testing function
Peak value memory
Analogue output
Well-structured user interface

Operating principles

For measuring all magnetic properties of magnetic material relevant to quality control. Applications in research and development, automatic process control, quality control, and at incoming inspection.

When the flux density is changed a voltage is induced proportional to the change in flux. The F 10 Fluxmeter integrates this voltage and indicates the voltage integral.

The self-calibrating function of the instrument ensures that the measurements are always accurate. Display of the measured values in a selection of scales: e.g. Tesla, A/m or Vs. In this way optimal use is made of the possible applications.

Very easy to operate because of:


    • Drift compensation • Digital display filter • Conversion of measuring scales
    • Self-calibration • Bar graph display • Window comparator
    • Percentage display • Physical probe parameters saved in memory
    • Automatic probe identification • Choice of manual or automatic range
    • Remote control via digital interfaces


Customer-specified probes also available

Technical data:                     Fluxmeter F 10
Measuring mode: free of drift integrator with 24-bit A/D
Measuring ranges: 400 µVs, 4, 40, 400 mVs
Resolution: maximum 0,1 µVs
Selection of range: automatic or manual
Accuracy: 0,1 % after self-calibration
Measuring rate: 50 measurements / sec
Internal calibration: voltage- / time reference
Drift: <± 1 µV s / min
Input resistance: 1 kOhm, 10 kOhm ± 0,1 %
Connections: thermal low voltage mini-sockets on the front and back panel
Display: LCD 100 x 80mm, 4-digit display of measured value, bar graph display
Digital output: low / high / in / run
Digital input: reset / hold / range / drift zero
Interfaces: RS-232 C, USB optional
Peak value memory: digital recording at intervals of 20 ms,
analogue recording for high-speed pulses (optional)
Dimensions: 120 x 250 x 250 mm (height x width x depth)
Mains supply: 105– 125 V AC/ 210 – 250 V AC, 50 / 60 Hz